NMEA Cables & Sensors
Maretron NM-CF Mini Male to Micro Female Reducer The reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast b... More Details
Maretron NM-NM Mini Gender Changer, Male to Male Maretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network ... More Details
Maretron NMEA 0183 10 Meter Connection Cable f/SSC200 & SSC300 Solid State Compass
NMEA Cables & Sensors, Maretron
$105.67
NMEA 0183 10 Meter Connection Cable A 10 Meter NMEA 0183 connection cable specifically for Maretron's SSC200 & SSC300 Solid State Compasses. Product Specifications Dimensions8" L × 7" W × 1" HShipping... More Details
Network Bus Extender Part #: NBE100-01 Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. T... More Details
Maretron NMEA 2000 Starter Kit Building a New NMEA 2000 Network onboard? Save when buying this Maretron NMEA 2000 Starter Kit. Everything you need for a basic NMEA 2000 Bus/Network or to start a compl... More Details
NMEA 2000 Starter Kit 1 Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network. Contacts are gold-plated b... More Details
NMEA 2000 Starter Kit 2 Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network. Contacts are gold-plated ... More Details
Pressure Transducer 0 to 1.5 PSI For use with FPM100 Fluid Pressure Monitor WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to c... More Details
Pressure Transducer 0 to 3 PSI - for the FPM100 Fluid Pressure MonitorWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause c... More Details
Pressure Transducer 0 to 5 PSI - for FPM100 Fluid Pressure MonitorWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cance... More Details
Pressure Transducer 0 to 50 PSI All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system... More Details
RAA100 NMEA 2000®Rudder Angle Adapter The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on t... More Details
Rectangular Magnetic Switch for Indoor The 1035 Series magnetic contact saves installation time through the use of a specially formulated 3Mr adhesive tape. The tape, which establishes a permanent bon... More Details
RIM100 Run Indicator Module Part #: RIM100-01 Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit ... More Details
SIM100 Switch Indicator Module Maretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detecto... More Details
Maretron Solid-State Rate/Gyro Compass w/10m Cable & Connector
NMEA Cables & Sensors, Maretron
$613.67
Solid-State Rate/Gyro Compass w/10m Cable & Connector Maretron's SSC300, implementing the second generation of Maretron's award-wining compass technology, is a solid state, rate gyro electronic compas... More Details
Solid-State Rate/Gyro Compass without Cables Maretron's SSC300, implementing the second generation of Maretron's award-wining compass technology, is a solid state, rate gyro electronic compass that pr... More Details
Submersible Pressure Transducer 0-3 PSI Maretron’s submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connec... More Details
The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can... More Details
TLA100 NMEA 2000®Tank Level Adapter The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel w... More Details
The TLM100 is used to sense levels of liquid tanks using ultrasonic technology and transmit the liquid levels over the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel ... More Details
The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere o... More Details
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature th... More Details
Ultrasonic Wind & Weather Antenna Maretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed u... More Details
USB100 NMEA 2000® / USB Gateway Maretron's USB100 is a gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer running navigational software - with an NMEA 2000® ne... More Details
Water In Fuel Detector Part #: WIF-RK30880-E A WIF-RK30880-E Fuel detector mounted on the bottom of a fuel filter will provide a voltage when water is detected in the fuel. This voltage can be detecte... More Details
SmartFind M15S AIS Class B Receiver/Splitter McMurdo's SmartFind M15S is a low cost receiver that puts AIS technology within the reach of even those on a limited budget. It receives all Class A, Class... More Details
4-Way Block for NMEA 2000 Networks Navico's 4-Way Block accessory for NMEA 2000 Networks should be used where multiple drop-cables are required in close proximity to make a more cost-effective and str... More Details
EP-80R Temperature Sensor -NMEA2000 Transom Mount Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following temperature types: Outside Inside Engine Room Cabin Li... More Details
Fluid Level Sensor Transmits the tank level from a suitable tank level sender unit on the the NMEA 2000 network. Replaces EP-65 Reports Tank Fluid Level: 0-100% Pre-configured for Fuel Tank Instance 0... More Details
Fuel Data Manager Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used. Features Replaces EP-85 Monitors Fuel Rate/... More Details
N2KEXT Cable Micro-C - 10M Medium Duty Cable - N2K NMEA 2000 Micro-C Medium duty cable. 10M (33 ft) Low loss 18 gauge cable recommended for network backbone runs. Product Specifications Dimensions11" ... More Details
N2KEXT NMEA2000 Cable Micro-C Medium Duty - 20M 20M (65.6 ft) Low loss 18-gauge cable recommended for network backbone runs resulting in a more robust network. Cables are identified by orange locking ... More Details
NMEA 0183 Interface Cable The NMEA 0183 interface provides a bi-directional gateway between an NMEA 2000® network and NMEA 0183 devices. Ideal for retrofitting NMEA 2000 devices while retaining existi... More Details
NMEA 2000 Cable - 6M Features: Length: 6M NMEA 2000 Cable Product Specifications Dimensions10" L × 10" W × 1" HShipping Weight1.6 lb More Details
NMEA 2000 Remote Button This simple-to-install remote button allows for convenient placement for an emergency ManOverboard (MOB) button, which can trigger alerts across an NMEA 2000® system and device... More Details
NMEA 2000 Right-Angle Interconnect Cable - Micro-C This right-angle cable is made for connecting to NMEA 2000 displays. The right angle can be useful when making a connection due to its low profile. ... More Details
Transom Mount Speed Sensor Transom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector. Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling... More Details
Temperature Sensor Thru-Hull Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following temperature types: Outside Inside Engine Room Cabin Live Well Bait Well Ref... More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Spur Cable Raymarine 1 meter Spur Cable for SeaTalkng Product Specifications Dimensions7" L × 6" W × 1" HShipping Weight0.05 lbCountry of OriginHUNGARYHarmonized Code8536.90.40.00 More Details
Spur Cable Raymarine 1 meter stripped end Spur Cable for SeaTalkng Product Specifications Dimensions4" L × 3" W × 1" HShipping Weight0.2 lbCountry of OriginHUHarmonized Code9014.90.40.00 More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Spur Cable Raymarine 3 meter Spur Cable for SeaTalkng Product Specifications Dimensions8" L × 8" W × 1" HShipping Weight0.41 lbCountry of OriginHUNGARYHarmonized Code8536.90.40.00 More Details
Spur Cable Raymarine 3 meter stripped end Spur Cable for SeaTalkng Product Specifications Dimensions4" L × 4" W × 1" HShipping Weight0.3 lbCountry of OriginTWHarmonized Code9014.80.20.00 More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Spur Cable Raymarine 400MM elbow Spur Cable for SeaTalkng Product Specifications Dimensions1" L × 1" W × 1" HShipping Weight0.1 lbCountry of OriginUNITED STATESHarmonized Code9014.80.20.00 More Details
Spur Cable Raymarine 400MM Spur Cable for SeaTalkng Product Specifications Dimensions7" L × 6" W × 1" HShipping Weight0.05 lbCountry of OriginHUNGARYHarmonized Code8536.90.40.00 More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The b... More Details
Autopilot Backbone Cable Kit This autopilot backbone cable kit is required to connect the X-10, X-30, X-CAN and X-SOL corepacks to the ST70 Autopilot Control Head. Kit Includes A06028 - STNG T-piece c... More Details
Raymarine AXIOM Power Cable 1.5M Right Angle & NMEA 2000 Connector
NMEA Cables & Sensors, Raymarine
$61.86
AXIOM Power Cable 1.5M Right Angle & NMEA 2000 Connector Features: AXIOM Power Cable 1.5M Right Angle NMEA 2000 Connector 90° Product Specifications Dimensions7" L × 7" W × 1" HShipping Weight0.5 lbCo... More Details
Blanking Plug f/SeaTalk ng This blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect them. Product Specifications Dimensions3" L × 1" W ×... More Details
Cable Kit NMEA2000 Gateway Cable Kit for NMEA2000 Gateway, MFG# T12217. Consists of 1M ST-ng spur cable, DeviceNet adapter cable, ST-ng 5-way connector, ST-ng power cord, 2 ea. ST-ng terminators. Prod... More Details
Raymarine Devicenet Female ADP Cable - SeaTalkng - NMEA 2000
NMEA Cables & Sensors, Raymarine
$56.23
Devicenet Female ADP Cable - SeaTalkng - NMEA 2000 Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. Female: 15.7" (0.4m) Product Specifications D... More Details
Devicenet Male ADP Cable SeaTalkng to NMEA 2000 Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems. Male: 1.5M cable Product Specifications Dimensio... More Details
SeaTalk 1 to SeaTalkng Converter Kit The SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with le... More Details
Evolution Cabling Kit - R70160 The Evolution SeaTalkng cable kit contains: 1 x SeaTalkng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connec... More Details
GA200 GPS Sensor for AIS700 The GA200 is an external antenna, suitable for improving the reception of the internal GNSS (GPS / GLONASS) receivers of compatible MFDs, AIS devices, and VHF radios. The G... More Details
Raymarine In-Line Terminator In-Line SeaTalkng Terminator f/Long Cable Runs old part number a80001 , now its a06074 Product Specifications Dimensions2" L × 1" W × 1" HShipping Weight0.03 lbCountry of ... More Details
SeaTalk 2 / NMEA 2000 Interface Cable (1.5m) Interface cable for connecting E-Series displays to Raymarine SeaTalk 2 or 3rd party NMEA 2000 Devices. Twist-lock connector at the E-series display end, a... More Details
Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with t... More Details
5-way SeaTalkng Connector used for connecting spurs to the backbone. Product Specifications Dimensions5" L × 1" W × 1" HShipping Weight0.11 lbCountry of OriginHUNGARYHarmonized Code8536.90.40.00 More Details
The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components: A06031 SeaT... More Details
SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables. Product Specifications Dimensions3" L × 1" W × 1" HShipping Weight0.03 lbCountry of OriginHUNGARYHarmonized Code8536.90.40.00 More Details
SeaTalkng Terminators attach at each end of SeaTalk backbone. Two are required per system. Product Specifications Dimensions1" L × 1" W × 1" HShipping Weight0.1 lbCountry of OriginHUNGARYHarmonized Co... More Details
SeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables. Product Specifications Dimensions2" L × 2" W × 1" HShipping Weight0.05 lbCountry of Origi... More Details
ST-Ng to DeviceNet Female SeaTalkng backbone cable to DeviceNet (Female) - 400mm Product Specifications Dimensions12" L × 8" W × 1" HShipping Weight0.3 lbCountry of OriginCHINAHarmonized Code8544.49.1... More Details
ST-Ng to DeviceNet Male SeaTalkng backbone cable to DeviceNet (Male) - 400mm Product Specifications Dimensions12" L × 8" W × 1" HShipping Weight0.4 lbCountry of OriginCHINAHarmonized Code8544.49.10.00 More Details
VHF NMEA0183 To SeaTalkng Converter Kit Raymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network. Product Specifications Dimensions9... More Details
NSO evo2 NMEA0183 Touch Monitor Serial Cable - 2m NSO evo2 NMEA0183/Touch Monitor serial cable 2 m (6.5 ft) Eight core cable. Four for NMEA0183 and four for RS422 serial Product Specifications Dimen... More Details
Simrad SimNet Product to NMEA 2000 Network Adapter Cable The Simrad SimNet Product to NMEA 2000® Network Adapter Cable, manufactured by Simrad, is used to connect a Simrad SimNet product like the NMEA... More Details
Siren Marine NMEA 2000 Cable & T Connector Connection Kit f/Siren 3 Pro
NMEA Cables & Sensors, Siren Marine
$38.47
NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The N... More Details
Veratron NMEA 2000® Kit w/Furukawa Connector (Honda & Tohatsu)
NMEA Cables & Sensors, Veratron
$393.21
You save:
$43.69
NMEA 2000® Kit with Furukawa Connector (Honda & Tohatsu) Features: NMEA 2000® Power cable (A2C3931290001) T-splitters (A2C3931270002) 6M NMEA drop cable with Furukawa connector (B00134601) Male (A2C39... More Details
